|

BEFORE and AFTER: Vintage Bar Cart Makeover From the Thrift Store!

Love this post? Share it! :)

For the sake of ease, let’s just call this a vintage bar cart makeover from the thrift store.

(Although I am definitely aware that this is an old TV cart from the 60’s and 70’s, I much prefer to think of it as a bar cart or, as I will use it, a tea cart!).

But regardless what you call it, it’s a DIY project that made me dance around in my garage with glee because it turned out waaaaay better than expected!

And what’s surprising is that I didn’t have a single blunder during this bar cart makeover.

Not once did I throw down my tools in frustration, walk away in confusion, or yell a steady stream of obscenities out in my driveway. Ha!

Maybe I’m just learning how to be more cautious before jumping into projects with two feet. Or simply taking my time.

Whatever the reason, this bar cart makeover turned out right, and I couldn’t wait to tell you the story of how this makeover came together!

Watch My Bar Cart Makeover Tutorial!

 

 

Materials & Cost

Can we just marvel for a second that this rolling TV cart (which I’m now going to refer to as a “bar cart”) only cost $22 to make over? The cost would have been slightly higher if I had paid for a few of the materials, but that’s one of the perks of being a blogger–companies like to send us “free” stuff without having to pay bloggers for advertising. But that’s a whole ‘nutha topic…I will say it’s fun to try new products and when they work, I like to pass on the recommendation. So overall, I paid $22 out of pocket for the materials. Sweet!

 

How to - Bar Cart Makeover - Materials Used - Thrift Diving

 

Here’s the cost breakdown:

(I participant in the Amazon Services LLC Associates Program and other affiliate advertising programs designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites).

Total cost: About $22.00 out of pocket!

STEP 1: Break Down the Bar Cart

This poor little cart sat in my garage for at least 3 years, like most furniture projects do, before I got my hands on it. At first glance, I knew I’d want to cover these shelves with some pretty paper because the condition of these old 1970’s shelves was bad.

 

 

The legs were rusty and had old vinyl peel-and-stick strips on the legs. The shelves were also bowed. Who wants to sit coffee, tea, or glasses of wine on a cart that’s sinking in the middle?

So this whole bar cart was going to have to be dismantled.

(And yes, that sticker is correct: only $6.99! I probably had a coupon, though. LOL).


How to - Bar Cart Makeover Tutorial - The metal was rusty and the shelves needed to be replaced. - Thrift Diving

 

STEP 2: Apply the Rust Remover Gel

I’d never used rust remover before, so I was really curious how this would work.

The turn-off was that the rust remover would need to be wrapped up in plastic for a good 12-24 hours. SIGH….This wasn’t ideal when I just want to move, move, move on a project, you know?

But sometimes you’ve got to be patient with DIY. It must be done in steps. You gotta follow the instructions and take your time for the best results.

BEFORE

How to - Bar Cart Makeover - Applying rust remover - Thrift Diving

 

You could see the brown rust pooling on the surface of the metal! It didn’t require much elbow grease, thankfully. It just wiped off with hot water and a rag.

 

 

While the metal of the bar cart wasn’t perfect, it was a huge improvement! This rust remover gel worked so well that the rust simply slid off that metal like butter on a hot potato!

After seeing how well they turned out after cleaning them, I knew they’d be great to leave natural. No spray paint needed.

AFTER!

How to - Bar Cart Makeover - Polished metal sides - Thrift Diving

 

When the metal was dry, I used some Goo Gone to remove any sticky adhesive that the laminate stickers had left behind.

I followed with 0000 steel wool and even some super fine 800-grit sandpaper! I would have liked a bit more shine, but compared to what the original looked like, this was a big improvement!

The bolts and metal rods holding the cart together also got de-rusted.

 

STEP 4: Cut New Bar Cart Shelves

Have you bought wood lately?? It’s expensive as heck for some types!

The cheapest option for me was to buy this 1/4″ underlayment, which is typically used for under flooring. But it was large enough and thick enough to cut two pieces from it and still have enough left over for other projects.

 

How to - Bar Cart Makeover - Using the old shelf as a template. - Thrift Diving

 

 

How to - Bar Cart Makeover - Use a circular saw to cut out new shelves - Thrift Diving

Here, you can see on the original shelves that there was a groove, a ditch, where the side piece slides on to the shelf.

How to - Bar Cart Makeover - Shelves need a scoring line - Thrift Diving

 

In order to re-create that for my new bar cart shelves, I had to set the depth of my circular saw really shallow to where it just barely grazed the wood. I could only hope I had done it properly so the end caps would fit on the new shelves.

 

How to - Bar Cart Makeover - Creating a new scoring line. - Thrift Diving

 

STEP 5: Glue Paper to the Wood Shelves

This is where I needed to make sure I took my time. This marble paper at $8.00 a sheet, while it isn’t too expensive, wasn’t that cheap that I wanted to ruin it due to stupid errors, like applying it crooked or ripping it.

I bought the paper from Paper Source, which almost makes me drool whenever I go there and see what goodies they’ve got in stock! They’re handmade and are usually in limited supply, so I’ve learned that when you find a print you like, you must buy as much as you can afford. They usually don’t re-stock the same styles.

Related: See my UGLY lamp makeover using pretty paper on the lampshade.

 

How to - Bar Cart Makeover with marbled paper - Thrift Diving

 

Here is where you can buy the marbled fine paper from Paper Source, using my affiliate link.

The marbled sheets I used for this bar cart makeover had more white than blue, but both are equally stunning, wouldn’t you agree? And I love that it comes from a renewable source in Nepal! Makes this project even more unique. 😉

 

Blue on Natural Marble Fine Paper from Paper Source - Thrift Diving Blog

I used the spray adhesive on both the paper and the wood shelf, letting it sit for 1 minute before adhering them together.

The brayer, which is a hand tool with a roller on it, helped to remove any bubbles left behind. It was a nice, secure bond between the paper and the shelves.

 

How to - Bar Cart Makeover - Use spray adhesive to secure the paper to the wood. - Thrift Diving

 

STEP 6: Attach Wooden Sides

Because of the metal and wood pieces that capped the edges of the shelves, I had to do a few things to get those to fit. You can watch the video tutorial on my YouTube channel to see the details.

But overall, it turned out great!

I decided to go with a white semi-gloss for the wooden sides of the bar cart shelves. But at first, I wasn’t sure what color would look best, so I did some tests, which I explained in the bar cart makeover video, as well. I’d always recommend testing things out when you’re not sure what colors/styles look best together. Buy extra materials so you’ll be able to do those tests!

 

How to - Bar Cart Makeover - Line shelves with paper - Thrift Diving

 

STEP 7: Re-Assemble the Bar Cart

Getting the cart back together was pretty simple. I just had to be careful I didn’t drop or scrap the fresh paint or to tear the new paper-lined wood shelves!

STEP 8: Add the Custom Glass

I stopped by my local Ace Hardware to get some glass cut (I don’t believe that Home Depot or Lowe’s cut glass). Surprisingly, it was only $20 total for the two pieces of glass! The glass added that extra “umphf!” I was looking to achieve, stepping it up and making it look more swanky and shiny.

Why I Didn’t Use Tempered Glass

Some people have criticized that this glass I used is window-pane glass and isn’t strong enough to withstand any kind of wear and tear and that if it breaks, it can be dangerous. I would agree with them–it’s definitely not ideal.

Tempered glass is what’s typically used for glass table tops, glass shelves, etc. But I did a quote online for custom tempered glass and–OMG–it was $238 total for two pieces of tempered glass 1/4″ thick in these dimensions!

That’s just not realistic for a $6.99 bar cart!

So, I’ll take into consideration that this glass could potentially be dangerous if the cart should tip over, or if something is slammed down onto it. I’ll keep those things in mind. Who knows, maybe I’ll decide to try to epoxy over it to achieve the same glassy finish. We shall see! But for now….

Let’s have another look the “before.”

BEFORE

How to - Bar Cart Makeover - Before - 1970's bar cart with marble paper. - Thrift Diving

And here’s the “after”!

AFTER: Bar Cart Makeover

How to - Bar Cart Makeover - Before and After of a 1970's cart with marbled paper. - Thrift Diving

 

BEFORE

How to - Bar Cart Makeover - Before and After of a 1970's cart with marbled paper. - BEFORE - Thrift Diving

 

AFTER!

How to - Bar Cart Makeover - Before and After of a 1970's cart with marbled paper. - AFTER - Thrift Diving

 

I just can’t get over this marbled paper…it’s GOR-GEOUS! I feel like I could get lost in it, don’t you? It’s that good.

 

How to - Bar Cart Makeover - Before and After of a 1970's bar cart with marbled paper. - AFTER - Thrift Diving

 

You’re probably wondering where I’m going to put this bar cart.

It will likely go in my dining room, but my dining room is waiting for a makeover. It’s been just “existing” since we moved in back in 2010. So it’s long overdue for a refresh. And this cart will go in there! I’ll likely use it for a tea cart since we’re big tea and coffee drinkers over here (although a ‘lil bit of wine every now and then is always a great idea….). 😉

 

How to - Bar Cart Makeover - Before and After of a 1970's bar cart with marbled paper. - Can be used as bar cart or tea cart. - Thrift Diving

 

When I look at the metal, I’m glad that I removed the rust and simply restored it. To have spray painted over the metal would have taken something away from the beauty of this vintage bar cart (or rather, TV stand, since most people probably used this as a TV stand back in the 70’s!).

I had to make a couple adjustments to the bottom shelf because I didn’t screw it together properly and it caused the edge of the glass to stick up. But that’s all been taken care of. 🙂

 

How to - Bar Cart Makeover - Before and After of a 1970's bar cart with marble paper. - Can be used as bar cart or tea cart. - Thrift Diving

 

How to - Bar Cart Makeover - Before and After of a 1970's bar cart with marble paper. - Glass on top of bar cart. - Thrift Diving

Want More??

And if you’ve enjoyed this bar cart makeover, check out my other projects where I’ve used paper creatively!

 

How to - Bar Cart Makeover - Before and After of a 1970's bar cart with marble paper. - Tea cart. - Thrift Diving

 

Do you love this bar cart makeover? Click here to SAVE it on Pinterest!


 

This ugly 1970's TV stand / bar cart was repurposed into a pretty bar cart! This furniture makeover looks amazing now! See the transformation on the blog! - Thrift Diving

 

So what do you think?! Do you love this TV cart / bar cart makeover and marbled paper as much as I do?! Leave a comment and let’s chat about it!

 

Download the 5 freebies!

Thrift Diving inspires women to decorate, improve, and maintain their home themselves...using paint, power tools, and thrift stores! Use these 5 printables, checklists, and ebooks to get started!

Now go check your email for those freebies! Powered by ConvertKit

Love this post? Share it! :)

Similar Posts

53 Comments

  1. It is beautiful! You have inspired me to go find an old TV stand to update for a plant stand for my new all weather room (whenever it finally gets done this year). You always have such great makeovers. Thanks for sharing with us again at #HomeMattersParty

  2. This is beautiful! I’ve been looking for a bar cart and hopefully I’ll find one soon. This has given me a lot of inspiration!

  3. Michelle Ewen says:

    Hi what epoxy did you use for the test strip? I know it turned the paper yellow but your test stick with the paint was gorgeous. Thanks

  4. As you put glass on top why not try something like modpodge or another decopage sealer ? There are quite a few different kinds out there

  5. What a great job! The marbled paper is beautiful, good choice. I’d love to see it if you epoxied it, I’m just dabbling in epoxy but in jewellery. I’m sure you’ll get a lot of use out f it

    1. Hey there, Linda! I haven’t decided yet! I was actually thinking of doing another video and testing all the options: epoxy, sealers, and more! I’ll keep you posted what I decide to do!

  6. What a gorgeous makeover, Serena. I really like the way that marbled paper turned out. What a great idea. I love Paper Source, and never miss a chance for a visit when I got to Santana Row nearby.

    That rust removing gel worked like a charm! It’s all as amazing as you are.

    1. Hey, Alys! Awww, thank you for such sweet comments! I’m glad you like it. It was an exciting project to do. It’s just reached 102,000 views on YouTube, which is insane! I’m so glad people like it!

  7. Pat Kennedy says:

    Hi Serena,
    In all honesty, I had my doubts about this cart. However….. you did an excellent job giving this sad little cart a new lease on life!
    I also have concerns on the leaking down and ruining the pretty paper. Suggestions? Nada…sorry.
    Unless, like on my dining room table which has glass on top of the wood, I have those little clear round disks so I can get under the glass before it soaks into the paper. Other than that, I would be interested if some idea pops up from your faithful followers, that solves this dilemma.
    Great work!

  8. Brenda Fergen says:

    I’d definitely put something on the paper under the glass to preserve it. Any spills could run down the glass and pool under it, ruining the paper.

    This was a lovely project. The paper was so pretty. I would never feel comfortable using the circular saw like you did, though. Kudos on a nice step-by-step description of what you did.

  9. Brenda Young @Unique Junktique says:

    I adore the swanky cart! It really caught my eye, that paper is amazing I thought this piece was painted and epoxied, you fooled me! A great retro rehab that is just so on point….. great job really love this piece!

    1. Awww, thank you, Brenda! I may very well have to epoxy it, just in case that glass doesn’t hold up. But I’ll keep you posted on if I do epoxy it and if it turns out! 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *