Power Tools 101: What to Buy and How to Use Them

Love this post? Share it! :)

If you’d like more information about what tools and accessories you need to buy, check out how sawhorses can create an affordable easy-to-set up workspace and check out my Resources page.

Power Tools 101 - What to Buy and How to Use It Thrift Diving

If you’d have told me years ago I would be writing a Power Tools 101 blog post, I would have laughed in your face. Aside from holding a power drill, I’d never been anywhere near a power tool!

I was one of those chicks that had always wanted to learn, but the thought of even attempting it was intimidating.

But I remember the first time I got my hands on some power tools. 

It was in 2013 at a DIY (do-it-yourself) blogging conference in Atlanta. Not only was I excited to be there because (hellllooooo!) it was a trip away from home with fellow bloggers, but because there were–gasp–power tools workshops!

You can see my excitement in this picture from the conference!

 

power tools 101

 

 

I fell in love with power tools and have never looked back! I love to use power tools to upcycle, repurpose, and refinish my second-hand thrifted finds!

In today’s post, for those of you who have been wanting to learn to use power tools, this post will give you the resources and encouragement to at least use your first power tool so you, too, can feel like a total DIY badass!

Power Tools 101: What Power Tools to Buy and How to Use Them

I’ve always thought of some power tools as less intimidating than others. So I always recommend newbie power tools users to start with a jigsaw first (in addition to a power drill, which you’ll read about later.).

Power Tool Must Have #1: JigSaw

 

How to Use a Jig Saw

 

Why Do You Need It?

Depending on the type of blade you’re using, you can make curved, decorative cuts and straight cuts. It’s usually best for thin materials. So if you need to cut a thick 4×4 piece of wood, this would not be the tool to use. LOL. You wouldn’t build a fence with a jig saw or do any heavy-duty cutting.

It’s my go-to power tool when I need to make quick easy little cuts for thin materials, like if I’m making wood crafts, such as my Wooden DIY Journal (which make great DIY gifts, by the way!) and when I used it to cut a thin sheet of galvanized metal to make a sign.

 

Cutting thin metal with a jig saw

 

How Do You Use a Jigsaw?

The following 29-minute in-depth tutorial will walk you through how to use a jigsaw.

 

 

What Can You Make With It?

Have you seen those awesome little wooden decorative cut-outs that people make of their kids’ names on the wall? Well, those are done by jigsaws!

You can also use the jig saw to make the following projects:

 

How Much Do They Cost?

You might think they cost a lot, but jig saws are one of the most affordable power tools. You can buy a jigsaw (without the battery) for about $60. Be sure to pick up a 2-pack of 18-Volt Compact Lithium Plus batteries and a charging kit. You can use these batteries in over 70 RYOBI tools, so they’re a good investment!

What Accessories Will You Need?

You’ll definitely need these accessories when buying a jigsaw (contains affiliate links):

  • Dual-cut blades by Starrett. These blades are game-changer! Watch the above tutorial to find out why you need these type of blades for your jigsaw.
  • A pack of jigsaw blades. In addition to your Dual Cut blades, you should pick up a pack of jig saw blades, which will contain a bunch of blades for different types of cuts: blades for metal, blades for wood, blades for intricate scroll cutting, and more.  This pack of blades will have it all!
  • Clamps. Never use a jigsaw without clamping your material down first on a work surface.
  • Batteries.

 

Power Tool Must Have #2: Circular Saw

 

How to Use a Circular Saw

 

Why You Need It

Circ saws (as they’re also called) are awesome because they can easily make rip cuts (when you slide a piece of wood up the length of the grain), cross cuts (when you’re cutting against the grain), and bevel cuts (when cutting at an angle). You can cut both wood and plastics with a circular saw!

How to Use It

This video will walk you through how to use a circular saw.

 

 

What Can You Make With It?

I think the question is what can’t you make with a circular saw! Ana White especially has a lot of great projects using 2x4s that you could make with a circular saw. Those are easy cuts! And this tool would get the job done.

I do a lot of upcycling projects of thrift store furniture and I’ve used it upcycle a changing table into a desk by cutting off its legs.

 

Changing table legs cut off with a circular saw

 

Here are some projects you could use a circular saw for:

The Home Depot's Girls Night Out - Blogger Thrift Diving doing a power tools practice cut with a circular saw

 

How Much Do They Cost?

A cordless circular saw (tool only) will only run you about $69, but if you get it as part of a bundle, and around holiday times, you may find a deal at The Home Depot.

What Accessories Do You Need?

There won’t be much you need when buying a circular saw! Most people don’t need to change their circular saw blade unless it needs to be replaced because it’s worn or you need to make finer cuts with a blade that has smaller teeth.

Otherwise, just pick up:

  • Kreg Rip Cut. While this isn’t required, it’s definitely one of my must-haves! Your circular saw locks on and it allows you to make straight cuts. Watch this quick video clip of a project I was working, while using the Rip Cut. It’s an amazing accessory to own.
  • Batteries. Some tools don’t come with batteries.
  • Clamps. Be sure to clamp your work down before cutting.

Power Tool Must Have #3: Sanders

How to Use a Sander

 

Why You Need It

If you love refinishing furniture as much as I do, you need a sander! When painting furniture, if you’re using a chalky paint, you usually don’t have to sand. However, if your surface is bumpy, chipped, uneven, you’ll need a sander to smooth that baby out before painting. Or if you decide to strip it and restain, you’ll need a sander to get it super smooth and ready for stain. Even if you’re building something from scratch, you’ll need to smooth that wood, too.

The question is, what type of sander should you get? Well, that depends on the job. Keep reading and watching to find out below!

How to Use It

 

 

What Can You Sand With It?

As you’ve seen in the video above, you can sand nearly any wood project, whether it’s a big flat piece of furniture, an intricate piece of wood with lots of details and small spaces, or something with lots of corners. There’s a sander for each of the types of projects you’re doing.

I refinished my $5.00 coffee table using a belt sander to get it done pretty quickly.

BEFORE

Thrifted-Coffee-Table-Makeover-half-sanded

 

AFTER!

Thrifted-Coffee-Table-Makeover-Thrift-Diving-Blog-14
Here are some other sanding projects to inspire you!

 

How Much Does It Cost?

There are different prices for each of the sanders. My favorite sander is the orbit sander. I tend to use it much more than the other types because I’m usually sanding small dresser tops or something. Those sanders only cost $40!! Seriously, that’s a steal, considering the results you get! Check The Home Depot for other sander prices.

 

What Accessories Do You Need?

  • Sandpaper. This is a must! You’ll go through this stuff like crazy! When refinishing furniture, you’ll need to start with tough grit first, around an 80-grit, then work your way down to a 150 medium-grit sandpaper, and then finish it off with something smooth, like 220-grit. Get all 3 to keep on hand! The type you buy will depend on the type of sander you’re using. For example, these types of sanding discs are used on the orbit sander.

 

Mid-Century-Modern-dresser-makeover-Use-several-grits-of-sandpaper-when-sanding-683x1024

 

Power Tool Must Have #4: Miter Saw

How to Use a Miter Saw

 

Why You Need It

The miter saw is what I like to call “The Big Daddy” of power tools! LOL. It’s a large table-top saw and it’s what I recommend people use after they’ve gotten a feel for the smaller tools, like the jig saw and circular saw. Once you’ve mastered those and feel confident, then it’s time for the miter saw!

When you need a fresh, clean, precise cut, or want to put up crown molding or picture frames (which requires angled cuts), then the miter saw is the way to go.

How to Use It

This video will help you with understanding how to use a miter saw!

 

 

What Can You Make With It?

As I mentioned above, crown molding and picture frames are what this big guy is best known for, along with simply getting great straight and angled cuts.

Decorative Planter Box Made From Fence Slats

 

How Much Does It Cost?

Out of all the power tools listed here, this one is the most expensive. The prices range, depending on the type of miter saw you get ($119 – $199 for a 10″ compound or sliding miter saw versus $249 for a 12″ sliding compound miter saw). Just depends on how much power you need and what size boards you plan to cut (TIP: You can cut wider boards up to 13.25″ with the larger 12″ sliding miter saw).

 

What Accessories Do You Need?

  • Miter saw stand. While you don’t need a miter saw stand, I highly recommend it, especially if you’re cutting long boards, like crown molding! You need something to hold up the long pieces of wood while cutting, and a miter saw stand will do this. It’s about $99.
  • Clamps. If you don’t have a miter saw stand and just have it on a table or something, you’ll need to make sure you’ve got the back of it clamped to a table, otherwise it could tip over. That’s how my current set-up of my miter saw is position; it’s just clamped to a small workstation. But it’s hard to cut large pieces of wood without assistance, so I’m upgrading to a miter saw stand.

 

Power Tool Must Have #5: Brad Nailer

How to Use a Brad Nailer

 

Why You Need It

This is one of my favorite power tools because you can make so many things with it! If you didn’t have a saw and just had The Home Depot cut pieces of wood for you, you’d still need a way to nail it all together, wouldn’t you? That’s where the brad nailer comes in. You can make countless crafts with it, too, along with putting up decorative molding around your home!

How to Use It

The biggest thing about using a brad nailer is knowing how to load the nails! Once you see how easy it is, this tool won’t intimidate you. Watch this clip below to see how I loaded it during a project.

 

How to load a brad nailer

 

What Can You Make With It?

  • Decorative wall molding. Brad nailers are awesome for easily securing decorative wall trim! Along with some Liquid Nails on the back of your wall trim and using your brad nailer with 18 gauge nails, you can create some visual interest in any room! In my pretty gray stenciled half bathroom makeover, I used 1 x 3 boards to break up the wall with stencils on top (using my favorite stencil), and then painting below the trim in a solid white. (NOTE: The crown molding was installed with a finish nailer which uses 16 gauge nails. Don’t get these two tools confused. Finish nailers use 16-gauge nailes, which are bigger and are designed for crown molding).

Small-Gray-Bathroom-Makeover-AFTER-ThriftDiving.com-blog-683x1024

 

  • Nailing together small lightweight materials. Brad nailers are also great for nailing together lightweight materials, like if you’re making a craft project, nailing a piece of wood to the back of a dresser, and other lightweight projects.

 

How Much Does It Cost?

You can get the 18-Volt ONE+ AirStrike brad nailer (it’s cordless!!) for $119, but be sure to pick up some batteries, like I mentioned for the other tools. With all the projects you can do around the home, including crafting projects, it’s worth it!

What Accessories Do You Need?

  • Lots of brad nails! 🙂 Trust me, you’ll go through nails quickly if you’re using your nailer often. I like to get packs of 18-gauge nails that have all different lengths (up to 2-inches) because sometimes you’ll work with thinner materials and other times thicker materials. For wall trim, I like to use 2-inch brad nails and secure them to the studs.

How to use a brad nailer - Thrift Diving

 

Honorable Mention: The Power Drill

I can’t talk about power tools without mentioning the power drill!

How to Use a Power Drill

Why You Need It

Many people think it’s just for driving bits–you know, screwing things in quickly and easily. But it’s also great for drilling holes into everything from wood, plastic, brick, and concrete.

How to Use It

A drill is super easy to use. Click here to watch a short clip from a project I was working on, where I show you how to load a drill bit by loosening the black chuck and then giving it a tug to make sure it’s secure.

How to Use a Power Drill - Tightening the Chuck

It’s also got an on-board magentic so that you can store loose screws while working on a project!

 

What Can You Make With a Power Drill?

Well, a lot actually!

  • Pilot holes. Hanging some curtains? How about wall art or shelving? Most things hung on your walls will need screws with anchors. Some anchors require you to drill a little pilot hole first, like in the above video, so that you can add a little anchor to help the drywall withstand the weight. That’s where power drills come in handy!
  • Projects with screws! Above I mentioned using a brad nailer to secure things together. Well, you can also use power drills to screw pieces of wood together with various types of screws. It just depends on the project and the materials you’re working with!
  • Decorative holes. Check out this project on How to Weave Yarn in Wood.

Creative projects with power drills

How Much Does It Cost?

The power drill is another tool that costs next to nothing. It’s $69 at The Home Depot, and this one comes with a battery and charger, so it’s a good deal.

What Accessories Do You Need?

  • Drilling and driving bits. You can’t use a drill without drilling and driving bits, my friends! I recommend the 90-piece set because you get everything you need in one set, including hole saw attachments, which is the other accessory I recommend below.
  • Hole Saw attachments. Well, you don’t need them, but they’re super nice to have and allow you to get creative with a power drill! You just attach it to the end of your drill, and it’s got super MONSTER teeth, and it just tears through the wood, leaving a nice, neat hole!

How to Use a Hole Saw Attachment

 

Hole saw attachments allowed me to create this super cute DIY drink holder with a secret snack compartment!

 

DIY drink holder with secret snack compartment

 

So What To Do Next??

That’s a lot of information to take in, isn’t it?!

Wow…over 2,600 words worth of information for you to digest! LOL. I know it’s a lot, and I know that power tools can be intimidating. But here’s what I want you to read next:

The Dangers of DIY: What You Should Know Before Starting Your Next Project

After reading that post and understanding what safety tips you need, you’ll be ready for your first power tool! Remember, always read the safety manual from front to back, and if you have questions, don’t be afraid to contact the brand with questions!

 

the-dangers-of-DIY

 

So are you ready for your first power tool?? Which one is most exciting to you and what would you make with it?

SIGNATURE

Download the 5 freebies!

Thrift Diving inspires women to decorate, improve, and maintain their home themselves...using paint, power tools, and thrift stores! Use these 5 printables, checklists, and ebooks to get started!

Now go check your email for those freebies! Powered by ConvertKit

Love this post? Share it! :)

Similar Posts

93 Comments

  1. Very informative resource for buying power tools and how to use it. I think its very helpful for us. Thank you, please keep sharing your throughout with us.

Leave a Reply to Teckla Cancel reply

Your email address will not be published. Required fields are marked *