| |

5 Questions You MUST Ask Before You Install a Mailbox

Love this post? Share it! :)

If you’ve got a dead mailbox hanging by a splinter, or it fell over and died the way mine did, then you’ve got to ask yourself the question, “Am I going to replace my own mailbox or do I need to hire a professional?”

Installing your own mailbox isn’t tough, but you have to ask a few more questions before you just jump right into it, which we’ll cover in this post.

Here’s how my dead mailbox looked when it finally keeled over!

BEFORE

 

How to build a DIY mailbox when you've got a dead mailbox - Thrift Diving

AFTER!

 

How to build a DIY mailbox post - 5 questions to ask before getting started. - Thrift Diving

5 Questions You MUST Ask Before You Install a New Mailbox

So before you jump into this project of installing a new DIY mailbox, ask yourself these important questions. You’ll thank yourself!

(I participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites).

1. I’m Not Digging Up Utilities, Am I?

Did you know that if you dial 811 from anywhere in the U.S. they’ll put you in touch with your state’s call center, who will then contact your utility company to let them know you’re about to start digging in your yard? If you’re planning to dig anywhere in your yard, particular deeper than 24″ (at least, there’s what the freeze line is in my area, so check to see what your freeze line is, as well), you are required to have them come to your house to mark the location of utilities around the are you’re planning to dig (even if you’re hiring a professional to do the job).

You’re required to wait at least 2 days before you start digging. And then once they come to mark the location of buried utility lines, you’ve got 10 days to start digging.

It’s not just awesome that they do this, but necessary: if you don’t call 811 before you dig (or check out their website to check your own state rules), you could get hit with fees and penalties if you hit a utility (and it could be dangerous). It could cost you thousands of dollars! So be sure to know where utility lines are buried on your property before you start digging.

 

2. What Style of Mailbox Do I Want?

There’s the obvious of wood vs. plastic. But even the way it’s mounted makes all the difference in the world! There are top mounted ones and ones that extend on an arm, etc. Which one is best?

Then there is the popular kind that has a planter on the back of them and has an arm that extends outwards, which I think looks awesome!

….Or you can buy a butt-ugly plastic mailbox like this. HAHAHA.

5 Questions You Must Ask Before Installing a Mailbox - mailbox humor - Thrift Diving

You can also construct a really inexpensive pressure treated wooden mailbox post. It only costs about $25, and you could paint it to your liking.

5 Questions You Must Ask Before Installing a Mailbox - Wood Mailbox Post - Thrift Diving

If you’re trying to build your own mailbox, these are great DIY plans to build your own mailbox post, which is probably much more labor intensive, but so much more rewarding!

3. Am I Going to Accidentally Knock Down My Mailbox Post?

Yep, if you don’t take into account the type of mailbox you want (e.g. top-mounted one vs. one sitting on an arm), along with the USPC regulations on mailboxes, you could end up your mailbox extending past your curb, and then guess who’s going to accidentally  into it when she comes to visit on Christmas? Yep–your 85-year-old Aunt Betty.

Guidelines suggest 6″-8″ back from the edge of the curb. (FYI, USPC also says mailboxes should be 41″ to 45″ in height to the bottom of the mailbox edge.)

So, be sure to plan accordingly for your new mailbox post.

 

5 questions to ask before planning to build a new mailbox post. - Thrift Diving

3. Do I Have All the Tools To Do This?

Tools aren’t too difficult, especially if you’re just installing a mailbox kit. If you’re building your own, it’s going to require a circular saw or some other method of cutting notches to join posts to create an “arm” to mount the mailbox. You’ll also need a screwdriver and some galvanized screws that won’t rust. You’ll also want to pick up a post digger, for about $35.

1_post digger

You can watch this video on how to use the post digger.

If you’re building your own post, you’ll also need:

  • a 4’x4′ about 6′ long (2′ will be buried) – You may also need a post depending on it you’re using a kit
  • Galvanized screwns or nails – They won’t rust.
  • Circular saw – for cutting notches to join the post with the arm.
  • Cement – Comes in a 50lb or 60lb bag.

 

5. How Do I Build a DIY Mailbox Post?

The key is making a plan and being patient, not rushing to do it. Now that you know the USPC mailbox guidelines on distance and height, and you know what style you want, you just have to figure out how to do it. If you’re just using one of the kits from the home improvement store, they’re pretty easy to assemble and probably have their own YouTube videos.

 

How to install a DIY mailbox post - Thrift Diving

 

But if you’re going the same route that I am, building a mailbox post from scratch, here are the best “How-To” videos for how to do it:

Resources

How to Notch Wood for a Mailbox Post – Great video from Ana White on how to notch wood, which you’ll need to do to build a post.

VIDEO: How to Build a Mailbox Post – This video will show you how to build the actual post.

MAILBOX PLANS: How to Build a Mailbox Post – This excellent post gives easy-to-read plans for a standard mailbox plan.

VIDEO: How to Install a Mailbox Post  – This video will show you how to set the post in the ground securely. If you’re building your own, be sure to build the whole post before installing it in the ground.

How to Build a DIY Mailbox Post

So do you want to see how I made my own DIY mailbox?

Get the instructions!

 

How to Build a Custom DIY Mailbox and Post - Thrift Diving

Building your own mailbox isn’t difficult as long as you’re asking the right questions and following the right instructions. Have you ever built your own mailbox?

Download the 5 freebies!

Thrift Diving inspires women to decorate, improve, and maintain their home themselves...using paint, power tools, and thrift stores! Use these 5 printables, checklists, and ebooks to get started!

Now go check your email for those freebies! Powered by ConvertKit

Love this post? Share it! :)

Similar Posts

24 Comments

  1. Hello! We are replacing an existing mailbox but hope to use the 4×4 post already in place. (The post seems solid; the mailbox itself is ugly and cracked.) The post extends only 24 inches above ground, but most mailboxes we’ve looked at suggest the post should be 48 inches. Is it possible to use these mailboxes anyway, or does it have to be a 48-inch post (presumably with an additional 24 inches below ground)?

  2. I sent away for a post. It measures 3.25″ X 3.25″ inches (maybe 5 or six feet long). Is this solid enough? One installer told me it should be at least 3.5″ X 3.5″ or else the snow plow will knock if over. I live in Northern Virginia and get a big snow fall about once every two years. My current post is 3.5″ X 3.5″.

  3. From your “5 questions-must-ask-install-a-mailbox” post: just a technical issue – in your blog you have written: “a 4’x4′ about 6′ long (2″ will be buried) ” While it may quickly be obvious to anyone reading it, I feel you should correct it to read “a 4″x4” about 6′ long (2′ will be buried) “. Thanks

    1. Great catch, Bill!! Sometimes it’s just one extra little mark that makes all the difference! 🙂 Will fix it now. Thanks!!

Leave a Reply to John Cancel reply

Your email address will not be published. Required fields are marked *